#aluminiumbendingmachine
#aluminiumprofiles
#aluminiumbending
GENERAL CHARACTERISTICS
Our IMG machines are specifically designed for bending medium and high section aluminum profiles.
Although they admit profiles of any size, the optimal operation of our machines begins with profiles of more than 10 kg / m, both for open, closed or solid profiles. One of the main advantages of our machine compared to others on the market is that the production time doesn’t vary regardless of the size of the profile to be bent.
Our machines bending system allows the manufacturing of bends that integrate different radiuses onto each single profile, radiuses that can point to either the same side, or to opposing sides --S-shape bends, without the need to include any straight in-betweens, thus achieving a curve continuum.
Another of the main advantages of our models is that the profile doesn’t suffer any type of damage during the bending process, leaving the curve in perfect condition for subsequent surface treatment (lacquered or anodized).
For all curves, with one or more radius, our method make G2 curves thanks to the semi-continuos system.
Some extra, straight material will be needed in both endings of each profile produced. Pieces that do integrate straight ends will keep the extra material as usable, whereas fully-bent pieces will produce such extra material as a by-product to be disposed of later. This straight material doesn't suffer any damage.
MAIN FEATURES
PATENT-PROTECTED MACHINE & SYSTEM.
MANUAL OR AUTOMATIC BENDING SYSTEM.
HIGH QUALITY BENDS. G2 TYPE.
TRANSIT FROM STRAIGHT TO CURVED WITHOUT DEFORMATION.
BENDING WITH DIFFERENT RADIUSES APPLIED INTO A SINGLE PROFILE WITHOUT DEFORMATIONS.
LOW DEVIATION FOR SHORT AND LARGE PRODUCTIONS.
VERY HIGH OUTPUTS.
BOTH OPEN-CLOSED PROFILE BENTS CAPABILITIES.
DIMENSIONAL STABILITY OF SECTIONS.
PROFILES GUIDES ARE KEPT OPEN, NO DEFORMATION SUFFERED.
NO DEVIATION IN THE X-AXIS FOR NON-SYMMETRICAL PROFILES.
PROFILE SURFACE WITH OPTIMAL QUALITY AFTER BENDING. NO SANDING OR POLISHING IS NECESSARY.
DIE FORM COSTS ALMOST NULL WHEN COMPARED TO OVERALL BENDINS SYSTEMS.
DIE FORM MANUFACTURE TIME: 1/2 WORKING DAYS.
EASY SOFTWARE CONTROL.
DELIVERY TIME: 3/4 MONTHS.
TECHNICAL CHARACTERISTICS
IMG-550 | IMG-340 | IMG-220 | |
Max. Profile Section | 550x500 mm | 340x340 mm | 220x220 mm |
Max. Profile Length | ∞ | ∞ | ∞ |
Minimum Radius | 5000 mm | 3000 mm | 1100 mm |
Extra straigth material (both endings-not deformed) | 2x650 mm | 2x485 mm | 2x385 mm |
Max. wb (cm3 ) | 14000 cm3 | 7000 cm3 | 2000 cm3 |
Manual Operation | yes | yes | yes |
Automatic Operation | yes | yes | no |
Aprox. size | 5200x2700x2150 mm | 4900x2700x1900 mm | 4500x2700x1700 mm |
